Vaporesso XROS Leaking? Here’s How to Fix It

Vaporesso XROS pods use a proprietary technology called SSS to help resist leaking. The bottom of an XROS pod is completely sealed aside from the airflow vent, and the pod also has an extra-thick silicone gasket that helps to keep e-liquid in its place.

No matter how well designed the product may be, though, you’re still going to experience a leaking vape pod from time to time. Considering the fact that they have holes on the top and bottom, it’s amazing that XROS pods prevent leaks as well as they do. That’s little comfort if you’re dealing with a leak already, but we’re here to help.

Is your Vaporesso XROS leaking? Here’s what you need to do.

Evaluate the Severity of the Leak

Before you get too concerned about your leaking Vaporesso XROS, the first thing that you should do is evaluate how bad the situation really is. Because of the way the airflow system works in a pod-based vaping device, it’s normal for a small amount of condensation to form under the pod. When that happens, you can remove the liquid with a cotton swab. If you see more than just a few stray droplets, though, your pod is definitely leaking. Continue reading to learn what to do next.

Dry Your XROS Completely

If you have an XROS pod that’s leaking badly, your first priority is to dry your device as much as possible because the e-liquid can potentially get inside and contaminate the electronic components. Here’s what you should do.

• Use a paper towel to dry the pod completely.
• Use cotton swabs to dry the chamber at the top of the XROS.
• Turn the XROS upside down and hold a paper towel over the pod chamber. Blow hard through the device’s air intake vent. Can you see liquid inside the chamber? Remove it with a cotton swab and repeat the process until the device remains dry.

Don’t Puff So Hard

The top reason why a Vaporesso XROS can leak is because you’re using excessive air pressure when puffing on the device. A small pod system is designed to provide a restricted draw like a cigarette, and to provide that type of experience, it has small airflow vents that are easily overwhelmed by hard puffing. If you puff too aggressively when using your XROS, you’ll force e-liquid into the pod’s coil assembly and cause it to flood.

Here's how to prevent your Vaporesso XROS from leaking due to puffing too hard.

• Remember that puffing firmly won’t cause your device to produce bigger clouds as it would when you smoke a cigarette.
• If you want your XROS to produce more vapor, you should take a longer puff rather than a harder one.
• When the incoming air activates the puff sensor in your XROS, the device’s light will turn on. That’s as much air pressure as you should use.

Don’t Overfill the Pod

Overfilling your XROS pod can also cause it to leak. That happens because when you close the pod, the silicone plug goes inside the filling port to seal it. If there’s no room for the plug, you’ll end up pushing some of the e-liquid out of the pod when you close it. When you fill your XROS pod, don’t fill it all the way to the top. Always make sure there’s enough room for the plug.

Make Sure the Pod Is Closed Securely

In addition to making sure that there’s sufficient room for the plug when filling your XROS pod, it’s also crucial to ensure that the plug is securely closed. That’s especially true if you’re using a side-filling pod because the plug that seals the filling port can easily become stretched, warped or cracked with frequent use. If the plug is damaged – and you store the device on its side when you aren’t using it – it’s likely that your XROS will leak.

• Check the plug to make sure that it shows no signs of damage. If the plug is no longer making a good seal, you’ll need to replace the pod.
• If the plug looks undamaged, make sure that you’re closing it completely when you fill your XROS pod. The plug should be fully pushed down on all sides. If you’re using a top-filling pod, make sure that the mouthpiece is on tightly and doesn’t wobble.

Watch Out for Fake XROS Pods

If your XROS has a persistent leaking issue even though you’re sure that you’re doing everything correctly, you should consider the possibility that the pod is either defective or fake.

Vaporesso is a well-known manufacturer with a lot of experience, and they test their products thoroughly before releasing them to ensure that they’ll function as expected. Fake pods do exist, though, and you need to be on the lookout for them because unscrupulous manufacturers always target the most popular brands. You’re particularly at risk of buying fake pods if you get them from a place like a convenience store or gas station. Always buy your pods from a reliable vape shop like VapeVibe.eu.

How can you tell if you might have a fake XROS pod? Here are some of the telltale signs.

• The pod doesn’t work in your device at all even though it’s brand new.
• The outer box doesn’t look right. An authentic box of XROS pods should have bold colors and sharp print quality. The cardstock should be firm, without squashed corners.
• The pod’s parts don’t fit together properly. If you’re using a side-filling pod, the plug should seal completely when you close it. If you’re using a top-filling pod, the mouthpiece shouldn’t wobble.
• The pod doesn’t fit in the device correctly and wobbles when it’s inserted. XROS pods are magnetic and should fit solidly when you install them. There should never be any risk of a pod falling out.
• The pod doesn’t produce the normal quality of flavor. Vaporesso uses a proprietary mesh coil shape, and the pod’s wick has a fiber blend specifically selected for top flavor quality and heat resistance. Third-party manufacturers can’t duplicate Vaporesso’s formula, so a fake pod won’t taste right.